undefinedJune 16,2021

Pot Lights for Residential and Commercial Areas

Pot lights or recessed light fixtures are one of the most popular indoor ceiling light fixtures. These tiny lights are known for their discreet profile and highly amiable design features. 

Refurbishing of indoor spaces requires proper planning and most lighting architects recommend the use of pot lights for different indoor areas be it residential or commercial such as cafes, restaurants, art galleries, shops, offices, etc. 

Technically, all lower ceiling areas can benefit from recessed lighting. These light fixtures provide a lot of benefits other than just ambient lighting. 

What Are Pot Lights? What Is Their Function? 

Pot lights or can lights are tiny light fixtures that consist of 

  • Housing 
  • Bulb & 
  • Trim 

These core components determine the fate of the light fixture in any setting. These lights require a hole to be cut out in the ceiling respective to their diameter. The sizing of a recessed light fixture is usually 2-6 inches. For smaller applications or task areas, 2-3 inches recessed lights use whereas for general lighting in a bigger room 4-6 inches recessed lights are appropriate. 

The Housing of Recessed Lights

Pot Lights


The housing is the core that holds all the electrical components of the fixture. It sits inside the ceiling, most recessed lights require a certain space above the ceiling and they fall under the category of NON-IC rated recessed lights. The IC-rated fixtures require insulation contact to function well without any casualties. 

The different kind of housings for different ceiling designs are: 

Remodel Ceiling Housing: 

Here the joists are already located even in older ceiling designs. 

Sloped Ceiling Housing:

 For installation in contemporary or technical architecture. These housings are highly adaptable to install even on walls or ground. 

New Construction Housing: 

For newer ceilings, they calibrate to have space for recessed light fixtures.  


Pot Lights


The trim is the outermost part of the fixture which directs or controls light from the fixture. It is due to the trim that the architects favor the use of recessed lights. These lights are commonly called downlights because in normal situations they project the light downwards. 

The trim allows three different layers of light i.e 

General Lighting 

General lighting is for spacious rooms which require general lighting. The trim designs for general lighting are open trim, baffle trim, and reflector trim. These trims have either a reflective or ribbed interior which creates a diffused lighting pattern. 

Task Lighting 

Task lighting is a very useful layer of lighting as with recessed light fixtures it is easier to control the lighting pattern with individual fixtures. The task light trims are eyeball, pinhole trims as they are rotatable and direct light in a fixed beam angle. This pattern enhances focus on the details and helps maintain unobstructed lighting for effective focus on the task on hand.

Accent Lighting 

Accent lighting is done for decorative reasons and is highly amiable to enhance the aesthetic appeal of the room. It focuses light on walls or prettier details of the room is complete by gimbal trim, wall wash trim. 

The bulbs for usual setups are HID lamp, halogen lamp, or CFL but they are quite ineffective in many situations. They are ineffective in the long run as they heat up very quickly, damage the fixture, or malfunction for several reasons.

The maintenance issues are quite repetitive and cost a lot. LED lamps on the other hand are very cost-friendly and have no maintenance issues. They are safe and have a longer lifespan with high quality and uniform lighting. 

Advantages of Installing Led Pot Lights in Residential and Commercial Spaces 

Pot Lights


LED pot lights require special consideration before installation as once after installation there won’t be any room for even minor changes. The installation involves cutting holes in the ceiling and in most cases, it is irreversible, which is quite damaging to the ambiance. But where it is doing properly; recessed lights tend to serve several benefits, you can learn more about how to install LED pot lights here.

More Overhead Space

LED recessed lights create a lot of overhead space in low ceiling areas, which is quite beneficial as some places require minimal lighting techniques which fill the room with lighting while also creating a decluttered look. Recessed lights sitting inside the ceiling make the room appear bigger which is often hindered by other light fixtures. 

Uniform Bright Light 

LED recessed lights to create a very uniform lighting pattern due to different trims. The lumen output of LEDs is quite higher than traditional lamps so they produce very bright light which in turn reduces the number of fixtures that can cover the entire area. The spacing between each fixture is done based on the diameter of the fixture and ceiling height. It helps with creating an unobstructed lighting pattern. 

Low Energy Consumption 

LED light fixtures have a very low energy consumption despite producing more lumens. The wattage of a single LED fixture against any traditional lamp is lower. LEDs provide quality lighting at economic costs in the long run. 

Low Maintenance  

LED light fixtures are very low maintenance as once after installation they barely require frequent replacement or maintenance of the fixture which costs a lot when it comes to traditional lamps because they keep malfunctioning every 6 months and eventually cause a lot of trouble with handling and overall ambiance. 

LED pot lights are versatile light fixtures that just blend in with any setup. Moreover, they are also pairable with other decorative light fixtures. In most cases, the trim is fashionable enough to appear trendy and blend in with the room’s decor. Due to this reason, they are quite a popular application in almost every refurbished space. 




Signs That Your Water Heater


DIY Housekeeping & Desig


5 Cool Modern Basement Ideas

Recent Post